Range 06Johannesburg
Engineering SteelsSupplier in Johannesburg. Cut to size, delivered nationwide.
The grades engineering shops machine every day, from free-cutting EN1A to EN24 in Condition T for heavily loaded shafts. Cut to the lengths you need.
What we stock
Full bars or cut to size.
Sizes and grades on the floor change with every delivery. Send your list and we confirm exactly what is available before you pay.
| Product | Notes |
|---|---|
| EN1A | Free-cutting steel for high-volume turned parts |
| EN3A and EN3B | Low-carbon general engineering steel, EN3B bright drawn |
| EN9 | Medium-carbon steel for sprockets, gears and wear parts |
| EN19 | Chrome-moly alloy steel for shafts, bolts and gears. Condition T available |
| EN24 | Nickel-chrome-moly alloy steel for heavy-duty shafts and gears. Condition T available |
| EN36B | Case-hardening steel for gears, cams and pins |
| K110 tool steel | Cold-work tool steel for dies, punches and shear blades |
| Spring steel | Sheets up to 3 mm |
Engineering Steels: grades and products
- EN19Chrome-moly alloy steel for shafts, gears and bolts. Condition T available.
- EN24Nickel-chrome-moly alloy steel for heavy-duty shafts and gears. Condition T available.
- EN9Medium-carbon steel for sprockets, gears and wear parts.
- EN1AFree-cutting steel for fast, clean machining of turned parts.
- EN3A & EN3BLow-carbon general engineering steel. EN3B is bright drawn.
- EN36BNickel-chrome case-hardening steel for gears, cams and pins.
- K110 Tool SteelHigh-carbon, high-chromium cold-work tool steel, similar to D2.
- Spring SteelSpring steel sheet up to 3 mm for springs, clips and shims.
Used for
- Shafts, axles and spindles
- Gears, sprockets and couplings
- Bolts, pins and fasteners
- Dies, punches and blades
- Springs and clips
Ready when it arrives
Cut to size
Bar, plate, tube, sections, Hardox and engineering steels cut to your sizes, so the pieces arrive ready to machine, weld or fit.
Full lengths or just the piece
Buy a full length or a full sheet, or only the pieces you need cut from it.
Nationwide delivery
Ordered in Johannesburg, delivered anywhere in South Africa. We quote the delivery with the order.
Engineering Steels questions
What does Condition T mean?
Condition T is a hardened and tempered condition with a tensile strength of roughly 850 to 1000 MPa. EN19 and EN24 supplied in Condition T can be machined and used without further heat treatment for many shafts and gears.
EN19 or EN24?
Both are high-tensile alloy steels. EN24 contains nickel, which makes it tougher and better for larger sections and the most demanding parts. EN19 is a common, more economical choice for shafts, bolts and gears.
What is K110?
K110 is a high-carbon, high-chromium cold-work tool steel, similar to D2. It holds an edge and resists wear, so it is used for dies, punches and shear blades.
Other ranges
Mild Steel
Bar, tube, angle, channel, beams, columns, plate, treadplate, roof sheeting, grating and palisades.
Stainless Steel
Round and flat bar, round, square and rectangular tube, angle, sheet, plate and treadplate.
Aluminium
Round, square and flat bar, round and square tube, angles, channels, sheet, plate and treadplate.
Copper & Brass
Copper bar, busbar, tube, sheet and plate. Brass bar, tube, sheet and plate.
Bronze & Cast Iron
Phosphor bronze PB1 and LG2, aluminium bronze AB1 and AB2, and cast iron, in round and hollow bar.
Wear Plate
Hardox and Bennox wear-resistant plate, cut to size.
Schedule Pipe
Mild steel and stainless steel schedule pipe, in full lengths or cut to size.
Phone, WhatsApp or email
Need engineering steels?
Sizes, quantities and where it needs to go. A photo of a handwritten list is fine. We reply with a written price.